FLIKKABOARDS CUSTOM FREERIDE

New product

Flikkaboard Custom Foil are made to your order - they reflect your actual needs.

More details

Available

1 890,00 €

Add to wishlist

More info

Flikka dedicated foil boards that feature wide tails, high lift bottom and sharp rails will enable you to get going and reach takeoff speed effortlessly. Thin profile of the boards is making the flight more stable and with the wide tail, you can easily control the foil and go upwind.

We offer two main dedicated foil shapes:

FOIL FREERIDE

was developed for relaxed foiling with small to medium sails. Narrower tail compared to the race shape to make entering the straps easily. Available in all desired sizes.

FOIL RACE

developed for super early takeoffs with racing sails. The wide tail gives you enough leverage to push on the foil and go as fast as possible. Cutouts in the tail for less drag during takeoff and touchdown.

We also produce hybrid boards where you get a regular freestyle, freewave or freeride board fitted with deep tuttle box. Please contact us to find more.

FREESTYLE-FOIL

Customers were asking for a quality solution that would allow freestyle boards to be used with foil wings when the wind drops.

We saw many broken boards where foil winds were fitted with power box which is simply not strong enough for this task. We used our proven freestyle shape, fitted it with deep tuttle mount and reinforced it where necessary. We also developed a G10 freestyle fin that can be used for such board. Total weight gain is only 300g which still makes a freestyle board light but it gives it another dimension and time on the water when the wind drops.

As usual, you can choose custom board specifics.

And since our boards are stronger, they will also last longer. We used all our little gadgets known from wave boards: stainless steel foot-strap inserts, full carbon monocoque mast box, and fin boxes (tuttle, deep tuttle or foil box). All to increase durability and lower the weight.

Custom foil boards are made to your order – they reflect your actual needs. You can give us your preferred specification or range of use and we will come with the best proposal. The only limitation is its maximum width at 91 cm. Here are some of our standard and most popular dimensions:

FOIL FREERIDE
105L 210cm x 74cm
120L 215cm x 79cm
145L 217cm x 84cm

FOIL RACE
140L 215cm x 85cm
160L 218cm x 91cm

S-GLASS
is our most popular construction that works best for the majority of riders. It’s a Combination of S-glass, biaxial carbon and Dyneema fibers which are strategically positioned where their characteristics are most needed- X-carbon construction over the standing area, Dyneema nose and an additional layer of s-glass on the rails. It offers the best combination of strength, impact resistance and price.

S-glass construction is available in 3 versions:
LIGHT: our lightest construction where board weights can get under 5 kg. Suitable for wave riding oriented riders who don’t jump much.
REGULAR: most all-around construction. Combines low weight, high strength, and good impact resistance. Suitable for all types of riders and all conditions.
HARDCORE: our strongest s-glass construction, made for big jumps and heavy landings. Suitable for riders who jump a lot. Build to last.

CARBON
If you need a responsive board then carbon is the right option. Strong for big surface area hits (landings) and extra stiff (be sure your knees and ankles will like it). We recommend these constructions for freestyle, slalom, freeride and bigger freewave boards, where lightweight and high-performance response is important.

Carbon construction is available in 3 versions:
LIGHT: Full high-grade biaxial carbon bottom and deck. These boards are perfect for all who appreciate light, stiff and reactive carbon feeling. More fragile than S-glass constructions and weaker because of high stiffness. Ideal for those searching for super early planning and high-performance oriented board that will be handled with care.
REGULAR: full biaxial deck and bottom with additional plain carbon reinforced deck, this construction is stronger than Light version and therefore better for boards that will be jumped more and ridden harder. Perfect for freestyle boards and slalom boards.
HARDCORE: Full biaxial carbon deck combined with s-glass and unidirectional carbon bottom. Super strong carbon board that can take some big jumps and flat landings. Ideal for HC freestylers who abuse their board in power moves.

Each product is good only as its weakest part. For this reason, we take a lot of effort to take care of every possible detail.

EPS
foam comes from a factory that is only 3 km away from our workshop. Together we developed and tested a special EPS foam that has the best characteristics for a windsurfing/SUP/paddle board. Due to the short travel distance of this voluminous, we are proud that we make a smaller negative impact on the nature that makes windsurfing a special sport.

PVC FOAM
We use highest grade divinycell foams in different density and thickness.

FOOT-STRAPS AND SCREWS
We make use of our own developed inox inserts that come with all of our boards. Over the years this system has proven to be 100% reliable and you won’t ever experience a broken screw or insert.

We use 4 screws per strap on the front and back foot-straps. We usually recommend 2 insert positions for back and front. More inserts are possible but usually not needed. Regular stance on wave boards is 42,5/45/47,5 cm, but all other options are possible.

You can also choose only one position as it saves some weight. And most people prefer just one foot-strap position anyway.
The board comes equipped with soft, durable and adjustable Flikka foot-straps. One important advantage of our custom boards is the flexibility to choose your own foot strap width. Regular is 15cm, but you can order a smaller or larger width.

FOOTPADS
You can choose white or black footpads with the option to have built in heel bumpers. There is also the option to choose white with tail-kick (no heel bumpers).

AIR-VALVE
You can choose between a regular valve screw or a Gore-Tex valve. Both options work fine and it is up to your preference what your board will have. Gore-Tex valve breath air all the time, so the pressure is always optimal. It is recommended by the supplier to be replaced every two years.

Reviews

Write a review

FLIKKABOARDS CUSTOM FREERIDE

FLIKKABOARDS CUSTOM FREERIDE

Flikkaboard Custom Foil are made to your order - they reflect your actual needs.

Summary

  • Product Name:FLIKKABOARDS CUSTOM FREERIDE
  • Product Reference: FLIKKABOARDS
  • Price: 1 890,00
  • Product Width: 80.00 cm
  • Product Height: 250.00 cm
  • Product Depth: 10.00 cm
  • Product Weight: 10.00 kg
  • Description: Flikkaboard Custom Foil are made to your order - they reflect your actual needs.
Path: > > > FLIKKABOARDS CUSTOM FREERIDE